your TV or AC remote is not working. Here's What To do

Here's What To do ....

So your TV or AC remote is not working, although the batteries are new, don't worry follow the steps below..

1 ). Switch ON the mobile camera and press each keys of remote before the camera if the small light in remote blows that key is working..

2 ). Open remote by using a dull knife..

3 ). Clean the circuit board to remove dirt and oil Using an old toothbrush to clean.The best solution to clean is rubbing some alcohol with a cotton ball.Then check the remote sometimes it will work.

4 ). Dip cotton swap in some alcohol or acetone &clean all the black contacts that meets with the circuit board on backside of rubber keypad.

5 ). Apply conductive paint to the keypad contacts.After dipping the paint apply a thin coat to each of rubber contacts on backside of rubber keypad..

6 ). Let remote dry for few hours and use.

7 ). If it still not works buy a new one !!!